Wireless Controls and Automation
   
 

Industrial Wireless Radio Controls 

  Performance

( 4 km )  2,5 Miles
Operation:  120/240VAC or 12VDC
Transmitter Handheld multichannel
Relay Output SPDT, 10A Class 2 pilot duty
  Output mode selection; Pulse, Toggle, ON or OFF delay

Heavy Duty NEMA4, IP65 UL Fiber enclosure
License free 150 - 160MHz Industrial ISM band
Factory configured systems, Ready to operate
No setup or programming required

Specifications
 

   Specifications      Digital Transmitter
Supply power Rechargeable battery
Supplied Power charger, Antenna, instructions
Transmitter power 30 dBm, per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded  EDTMF
Channels 16 addresses and up to 199 codes per system
Input Keypad Channel number
Response Loop 500 msec
Weight 8 Oz  (230g)  
Dimensions Portable 5"H x 3"W x 1.2"D

   Specifications      Digital Receiver 
Supply power 120/240VAC or 12VDC /  5watt 
Output   Relay SPDT 10Amp, Class 2 pilot duty
Frequency 160 MHz  • License free Industrial ISM band
Configuration DIP factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring DIN Screw Terminals
Antenna Z 50 Ohm SO239 RF connector
Ambient temp  14 to 140 F (-10 to 60 C)
Enclosure  NEMA4, IP65 Fiber UL listed
Dimensions 12Hx10Wx6D inches

 

DISCLAIMER: 
Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.
 
       
Wireless Range from:  4 Km   (2,5 Miles )
Optional Extended range up to to 16 Km (10 Miles)
 

Applications
:
Industrial remotes, Pump control, Lighting control, Traffic systems
Logistics, Packing and mobile system, PLC remote, Alarm systems 
Remote tank level operation, Generators
Solar,  Irrigation control.

   .Please request a quotation

   Part        Options:
916022  Handheld Transmitter 2km
916024  Handheld Transmitter 4km
916604  NEMA4 Receiver 4 Channel
916544  NEMA4 Receiver 8 Channel
  Transmission Status indicator
Fail Safe poling module
Battery Backup module
.
Transmitter Receiver Module Receiver Output

Output Options
for each channel


 

Latch / Toggle
On Delay Timer
Off Delay Timer
Single Shot
Pulse ON/OFF

Package include:  One  Handheld Transmitter, One  Base Receiver,
One Omni Antenna with 12ft coaxial cable, NEMA 4 Fiber enclosures & Instructions

  Typical application with Base and Portable transmitter 8 Channels 4x4 example:
   4 Relay outputs controlled by the Base transmitter and
   4 Relay outputs controlled by the Handheld transmitter
   

 

     Copyright   Electrodepot. All rights reserved